MIM250 INSTRUCTION MANUAL
8 To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed. When installing the ice maker under a
9 Before you move your ice maker into its final location, it is important to make sure you have the proper electrical connection. A standard electric
10 IMPORTANT: 1. All installations must be in accordance with local plumbing code requirements. Professional installation is recommended. 2. Wate
11 Operation Final Check List before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the ice maker?
12 Evaporator Never turn the water supply tap off when the ice maker is working. Never touch the evaporator when the machine is running. E
13 You may hear air being forced over the condenser by the condenser fan. During the Harvest cycle, you may hear the sound of ice cubes falling
15 Interior Cleaning It is the USER’S RESPONSIBILITY to see that the unit is properly maintained. It is always preferable and less
16 machine splash areas, plus the interior surfaces of the bin, deflector and door with the remaining sanitizing solution. Inspect to insure that al
17 Push the control panel cover to open it. The control panel includes one power switch, one button, one adjustable screw and four indicator lights
TABLE OF CONTENTS Page ICE MAKER SAFETY...
18 5. Power Switch: This is the main switch. When it is turned on, the unit goes into Stand-by mode for about 3 minutes, with all LEDs on, then st
19 Troubleshooting Before Calling for Service If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If t
20 Problem Possible Cause Probable Solution The ice maker stops suddenly while making ice. The electricity is off. Reconnect the power supply line. T
MAXXICE3355 Enterprise Avenue, Suite 160 Weston, Florida 33331Tel: 954-202-7419 - Fax: 954-202-7337
1 ICE MAKER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on you
2 Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, and do not use an extension cord.
3 batch of cubes must be discarded. If the ice maker will not be used for a long time, before the next use it must be thoroughly cleaned. Follow ca
4 Technical Information Model: MIM250 Electrical input: 115VAC ~ 60Hz Power consumption: 9.4 kW·h / 100 lbs of ice Ice-making/Ice-ha
5 Component Locations
6 Ice Maker Installation Unpacking Remove packaging materials IMPORTANT: Do not remove any permanent instruction labels or the data label on
7 Installing the stability brackets This operation requires at least two persons. If you wish to install the ice maker in a free-standing mode rathe
Comments to this Manuals